Dura-Line® Furnace Aftermarket Support and Advanced Coil Repairs

With the most advanced coil manufacturing and rebuild facility, along with top level mechanics, Inductotherm continues to provide our customers with high-quality OEM coil remanufacturing.

The Benefits of OEM Parts, Repairs, Service and Support

If you are in the market for aftermarket, talk to us first. Inductotherm is well-known for advanced melting, heating, holding and pouring equipment. Did you also know that as the Original Equipment Manufacturer (OEM), we provide our customers with proper aftermarket care and parts? Only Inductotherm Corp. can ensure your repair is done to OEM standards in our ISO-certified shop in Rancocas, NJ. Expert advice, knowledgeable staff and cost-effective solutions are simply a call away.

As the Original Equipment Manufacturer (OEM), we:

  • completely strip all the old insulation off the coil and sandblast the coil to bare copper to identify any problem areas.
  • know what coil insulation is required for your application.
  • can offer new/available upgrades to enhance safety, performance and reliability.
  • remanufacture the coil by bringing it back to today’s standards.

Inductotherm OEM coils that are remanufactured go through unmatched and stringent testing, including a helium leak test. While helium is an extra expense, it is proven to be the best way to accurately check for even the smallest coil leak since helium molecules are smaller than water. Any size leak can lead to a variety of problems, including electrical ground leakage; increased GLD reading due to wet refractory; decreased refractory life and arcing from turn to turn. Avoiding these problems is crucial to minimize costly downtime and delays. That’s why using the most advanced technology on the market today to prevent these situations is key. You can be assured that Inductotherm can bring your coil back to today’s standards. Proper coil insulation and the technical expertise required to properly apply it is critical, as the wrong insulation, mechanical design and support material could lead to shorter coil life, early coil failure and costly downtime.

Keep Your System Running at Peak Performance with the Proper Tools and Spare OEM Parts

Replacement Parts and Maximum Customer Up-time Go Hand-in-Hand

Maintain your melting system’s high level of quality, reliability, safety and performance by using only recommended and authorized Original Equipment Manufacturer (OEM) replacement parts purchased from Inductotherm Corp. Using substitute or unauthorized parts can cause equipment malfunction, resulting in equipment or property damage, including injury to personnel. Never accept third-party imitations.

Our equipment is designed and built to withstand the most demanding conditions. Yet if anything should happen, immediate response, extensive technical knowledge, in-depth experience, readily available parts and a company-wide dedication to customer satisfaction are the hallmarks of our unparalleled customer service and support. If technical support, service or parts are needed, we maintain a substantial inventory of OEM spare parts and have created a highly mobile worldwide multinational service team available around the clock to ensure maximum up-time at each customer’s facility.

Each Inductotherm induction Dura-Line® furnace or coil is shipped with a “Recommended Spare Parts” List. That list is unique to your system. It includes a list of detailed parts customized to your specific unit. To prevent unnecessary downtime, we recommend that each customer stock the items listed under recommended spares. However should you be caught off guard, we continue to maintain our large inventory of readily available parts that can be shipped out immediately.

Parts commonly found on a “Recommended Spare Parts” List include:

Precast Top Blocks
Precast Bottom Blocks
Coil Insulating Ring (Top and Bottom)
Tie Rod Insulators
Leak Detector Probe Assembly
Hydraulic Cylinder, Hose and Seal Kits
Pivot Pin and Bushing
Power Leads
High Resistance Water Hoses and All Stainless-Steel Hose Clamps
Protective Fiberglass and High Temperature Silicone-coated Sleeves for Water Hoses and Power Leads
Water Temperature, Pressure, Flow Gauges and Switches
Coil Insulation Repair Kits
Steel Lining Forms

Inductotherm High Current Capacity Leads Provide Lower Power Losses

When you choose Inductotherm you can be sure you are getting the right leads for your Inductotherm melting or heating system. We make the highest quality, high-current capacity leads for any application where flexible leads are required for carrying currents in frequencies from 60 to 10,000 hertz. With over 65 years of experience, you can trust that these leads were designed with efficiency in mind. Our water-cooled flexible leads provide maximum service life, lower power losses and reduced maintenance costs on any application where flexible leads are required. We use a flexible copper cable enclosed within a high grade rubber hose and fitted with a flare type terminal fitting that facilitates making both water and electrical connections easier.

Don’t forget to inquire about our trade-in program which offers a discount when you trade in your old leads. 

As your OEM, we can assess your needs and supply guaranteed solutions. Other benefits include:

  • Our non-conductive hose provides longer life and is less likely to kink
  • We take the guess work out by calculating the correct hose size needed, ensuring proper water flow
  • By determining the proper number of copper cables necessary, you achieve the highest efficiency

Contact us today to learn how Inductotherm’s Aftermarket Team can help with your coil repairs, replacement water-cooled leads and spare parts for your induction melting furnace.