Mini-Melt™ Furnace:
- Fast, clean furnaces for small batch melts, precision and laboratory-style casting.
- Strong, durable construction for long furnace life.
- Operates at frequencies from 3,000 to 10,000 Hz with maximum power utilization.
- Three direct-pouring styles - hand held, two-man shank and trunnion tilt. No need for ladles or additional handling devices.
- Wide variety of crucible formations available.
Dura-Line® Furnace:
- Free magnetic path within the furnace and state-of-the-art low heat content lid available for maximum efficiency.
- Side exit leads and bottom entry available.
- Easy all-around access, five-part construction and free-breathing coil offer tremendous accessibility for simplified maintenance.
- Super high-strength reinforced refractory with alloy castings
hold the coil and metal rigidly in place without flexure for
superior durability.
- Both hydraulic and hoist tilt versions available.
- Optional manual and hydraulic lids available.
- Furnaces are pre-packaged including all hydraulic piping.
Small Steel Shell Furnaces (Capacity From .35 T to 3T):
- Structural strength of a steel shell-based design with the economies commonly associated with box or frame furnaces.
- The inherent "hoop" strength and rigidity of a full steel shell
structure.
- Heavy-wall,
water-cooled, extended copper coil for maximum power efficiency.
- Cast ceramic mix tops
and bottoms with high magnetic permeability reinforcement added.
- Full shunt coverage
which, together with the steel shell, reduces EMF emissions to
less that 1 Gauss at 1 meter (1000 Hz).
Heavy Steel Shell Furnaces (Capacity up to 100 T):
- High performance in low and medium frequency melting.
- Hydraulic tilting cylinders that are shrouded from dirt and
metal splash provide smooth, controlled pouring.
- Water-cooled leads are protected from damage and permit power-on pouring to maintain metal temperature.
- Heavy-wall, water-cooled, extended copper coil maximizes power efficiency.
- Optional push-out linings reduce relining time and increase worker safety.
- Heavy steel shell provides maximum furnace rigidity and
strength for long lining life and the highest operating efficiency.
It also serves to deaden furnace noise.
- Stainless steel cooling sections at top and bottom provide uniform temperature gradients and extend refractory life.
- Tight-fitting, hydraulic lift-swing cover minimizes heat loss.
Optional extra close-capture fume collection cover removes smoke
and other air pollutants for greater operator safety.
Wide-bodied furnace configuration available to provide expanded
crucible opening and reduced furnace height.
IMPORTANT:
Personal Protective Equipment (PPE) must be worn
by anyone in proximity to molten metal.
|
