Batch Melting
Batch
Induction Melting, The Science and Technology:
by John
H. Mortimer, P. E. A compilation and update of Mr. Mortimer's papers and articles
on induction batch melting prepared for the American Foundry
Society, The CentreFrançais De L'Electricité,
the Australasian Foundry Institute, Foundry Management & Technology magazine
and Modern Casting magazine.
Significant new material has been included, Inductotherm,
2001
Achieving Success with a 7 Tonne, 7 MW
High-Powered
Medium-Frequency Furnace:
by L. J. Kikkert, J. W. Schut and P. S. Norton,
BCIRA International
Conference, Progress in Melting of Cast Irons, March 1990
Induction Power Supply Technology
Multiple-Output Power Supplies for Induction Heating and Melting Furnaces:
by Oleg S. Fishman, PhD, Inductotherm, March 2006
Multiple-Output Power Supplies Increase the Production of Investment Casting:
by John H. Mortimer, P. E. and Mark T. Eckert, Inductotherm, December 2001
New Technology for Controlling Temperature Profiles for Directional Solidification (DS)
and Single Crystal (SC) Casting Applications:
by Oleg S. Fishman, PhD, Inductotherm, December 2001
Pulse Width Modulation Inverters Using IGBT's:
by Oleg S. Fishman, PhD,Inductotherm, March 2000
Fundamentals of Metal Movement in Induction Furnaces:
by Oleg S. Fishman, PhD, Inductotherm, May 2000
AC Line Distortion from Static Power Converters Used in Induction Melting:
by Oleg S. Fishman, PhD, Inductotherm, September 1995
Power Supplies in Induction Melting Systems:
Keys to Understanding This Fundamental Melting Technology: by Oleg S. Fishman, PhD, Inductotherm, December 1992
Automated Pouring Technology
Coffee, Tea, ... of Molten Metal: by William Pflug and Emad Tabatabaei,
Foundry Management & Technology, July 2002
Automatic Pouring in Iron Foundries: by
Oleg S. Fishman, PhD, BCIRA Seminar, May 1992
Automatic Pouring of Molten Metal by
Utilizing Real Time
Vision Based Control System: by Emad Tabatabaei, American
Foundrymen’s Society Transactions 1990
Foundry Safety
A Troubleshooting Guide to Silica Dry Ram Refractories:
By understanding
what causes
refractory lining to fail prematurely,
foundrymen can increase
the life of their furnace refractories: by Modern Casting, June 1995
Foundry Automation
Advancing Melt Shop Automation: by Emad Tabatabaei, Foundry Management & Technology, November 1997
Charging Systems for Today’s
Hungry Furnaces: by David Remalia, Foundry Management & Technology, November 1996
Foundry Technology
Alloy Engineering Defies Gravity: by Modern Casting, December 2004
Casting of the Year: John Deere: by Modern Casting, June 2002
Sintering of Acid-Based Linings for Iron Melting in Coreless Furnaces: by Bernard M. Raffner, Foundry Management & Technology, December 2002
How Your Induction Melt Shop Can Survive the Power Crisis:
by Mark T. Eckert, Inductotherm, December 2001
Tomorrow's Induction Melt Shop
Technologies Today, Part I & II: by John H. Mortimer, P. E.. Foundry Management & Technology, March 1999
A New Frequency Selection Chart For Coreless Induction Furnaces: by Henry M. Rowan, Foundry Management & Technology, April 1987
Direct Electric Heat Melting Furnaces for ALuminum and Non-Ferrous Metals: by Oleg S. Fishman, PhD, Aluminum World, Volume 2. Issue 2.
Steel Making
Technical Innovations in Induction
Steel Making: by Oleg S. Fishman, PhD, American Foundrymen’s Society
International
Conference on Steel Foundry Melting & Processing, September 1996 |
